Mazda 3 since 2003
1. Operation and maintenance of the car
1.1. Description of the car
1.2. System of passive safety
1.2.1. Seat belts
1.2.1.1. Instructions for use of seat belts
1.2.1.2. Mode of automatic blocking of delivery of a belt
1.2.1.3. Seat belts (except the central seat belt on back sitting)
1.2.1.4. Otstegivaniye of a seat belt
1.2.1.5. Adjustment of a humeral strap of a belt on height
1.2.1.6. Pyrotechnic prednatyazhitel and limiters of loading of the seat belts established on front seats
1.2.1.7. The central seat belt on back sitting (a diagonal and zone belt)
1.2.1.8. Signaling device of malfunction of system of safety cushions and prednatyazhitel of seat belts
1.2.1.9. Safety of children
1.2.1.10. Installation sites of the children's holding devices
1.2.1.11. Installation of the children's holding devices
1.2.1.12. Installation of the children's holding devices with standard fastening of ISOFIX
1.2.2. Safety cushions – the SRS system
1.3. Use of the car to destination
1.4. Elimination of the malfunctions which arose in way or before a start of motion
1.5. Tables
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 









1e5999b2

1-2-1-2-rezhim-avtomaticheskojj-blokirovki-vydachi-remnya.html

1.2.1.2. Mode of automatic blocking of delivery of a belt

At installation and fastening of the children's holding devices it is necessary to switch the inertial coil to the mode of automatic blocking. It will prevent dangerous movement of the children's holding device at the road accident. To include the mode of automatic blocking, completely extend a seat belt from the inertial coil. Then fix by a seat belt the children's holding device, following instructions of the manufacturer of a concrete product. The seat belt will attract the children's holding device and will remain in the blocked state.
"previous page
1.2.1.1. Instructions for use of seat belts		 following page"
1.2.1.3. Seat belts (except the central seat belt on back sitting)