Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
2.1. General description of new engines of the L8, LF and L3 models
2.1.1. Mechanical part of engines
2.1.2. Mechanism of change of phases of gas distribution
2.1.3. Lubrication system
2.1.3.1. General information
2.1.3.2. Oil pump
2.1.3.3. Oil pallet
2.1.3.4. Oil filter
2.1.3.5. Valve of a maslorazbryzgivayushchy nozzle
2.1.3.6. Operation of valves maslorazbryzgivayushchy snuffled
2.1.4. Cooling system
2.1.5. Fuel system
2.1.6. System of production of the fulfilled gases and system of decrease in toxicity
2.1.7. Electric equipment of engines
2.2. Mechanical part of engines
2.3. Appendix 1
2.4. Appendix 2
2.5. Appendix 3
2.6. The Z6 engine – a mechanical part
2.7. Lubrication system
2.8. Cooling system
2.9. System of an admission
2.10. Fuel system
2.11. System of production of the fulfilled gases and system of decrease in toxicity
2.12. System of ignition
2.13. Control system
2.14. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 









1e5999b2

2-1-3-6-rabota-klapanov-maslorazbryzgivayushhikh-sopel.html

2.1.3.6. Operation of valves maslorazbryzgivayushchy snuffled

Fig. 2.46. The place of an ustanvka of valves maslorazbryzgivayushchy snuffled: 1 – valve of a maslorazbryzgivayushchy nozzle; 2 – block of cylinders; 3 – bent shaft


Oil pressure, influencing the backpressure ball valve in the valve of a maslorazbryzgivayushchy nozzle, opens and closes the oil channel of a nozzle and operates the beginning and interruption in supply of oil. The oil pressure exceeding a certain value, influencing the backpressure ball valve in the valve of a maslorazbryzgivayushchy nozzle, opens the oil channel of a nozzle, and there is an oil injection. On the contrary, with the oil pressure which is not exceeding a certain value, the backpressure ball valve is blocked by force of a spring and the injection of oil stops.


"previous page
2.1.3.5. Valve of a maslorazbryzgivayushchy nozzle
following page"
2.1.4. Cooling system