Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
2.1. General description of new engines of the L8, LF and L3 models
2.1.1. Mechanical part of engines
2.1.2. Mechanism of change of phases of gas distribution
2.1.3. Lubrication system
2.1.4. Cooling system
2.1.4.1. General information
2.1.4.2. Radiator
2.1.4.3. Fan, radiator fairing, broad tank of the cooling system
2.1.4.4. Thermostat
2.1.4.5. Pump of cooling liquid
2.1.5. Fuel system
2.1.6. System of production of the fulfilled gases and system of decrease in toxicity
2.1.7. Electric equipment of engines
2.2. Mechanical part of engines
2.3. Appendix 1
2.4. Appendix 2
2.5. Appendix 3
2.6. The Z6 engine – a mechanical part
2.7. Lubrication system
2.8. Cooling system
2.9. System of an admission
2.10. Fuel system
2.11. System of production of the fulfilled gases and system of decrease in toxicity
2.12. System of ignition
2.13. Control system
2.14. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 









1e5999b2

2-1-4-4-termostat.html

2.1.4.4. Thermostat
Fig. 2.51. Thermostat: 1 – party of the engine; 2 – party of a radiator; 3 – pump of cooling liquid; 4 – thermostat; 5 – thermostat case; 6 – cooler of oil (LF and L3 engines); 7 – heater hose (L8 engines); 8 – lower hose of a radiator

In system the wax thermostat with a pin spolzutsya. The thermostat from stainless steel is installed in the plastic case of the thermostat. When temperature of cooling liquid of the engine – is below 75 °C, the thermostat stops circulation of coolant through a radiator for improvement of warming up of the engine. When temperature of cooling liquid of the engine is between 80 °C and 84 °C, the valve of the thermostat begins to open, cooling liquid begins to circulate through a radiator for stabilization of temperature of the engine (fig. 2.51).
"previous page
2.1.4.3. Fan, radiator fairing, broad tank of the cooling system		 following page"
2.1.4.5. Pump of cooling liquid