Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
2.1. General description of new engines of the L8, LF and L3 models
2.2. Mechanical part of engines
2.3. Appendix 1
2.4. Appendix 2
2.5. Appendix 3
2.6. The Z6 engine – a mechanical part
2.7. Lubrication system
2.8. Cooling system
2.9. System of an admission
2.10. Fuel system
2.11. System of production of the fulfilled gases and system of decrease in toxicity
2.12. System of ignition
2.13. Control system
2.14. Tables
2.14.1. Table 2.1 Technical characteristics of engines
2.14.2. Table 2.2 Types of inserts of radical bearings, mm
2.14.3. Table 2.3 of the Characteristic of pistons
2.14.4. Table 2.4 Types of inserts of conrod bearings (mm)
2.14.5. Table 2.5 of the Characteristic of a driving belt
2.14.6. Table 2.6 of the Characteristic of a cam-shaft
2.14.7. Table 2.7 of the Characteristic of an asterisk of the drive of the mechanism of gas distribution
2.14.8. Table 2.8 of the Characteristic of an asterisk of the drive of the oil pump
2.14.9. Table 2.9 of the Characteristic of a chain of the drive of the mechanism of gas distribution
2.14.10. Table 2.10 of the Characteristic of valves
2.14.11. Table 2.11 of the Characteristic of a pusher of the valve
2.14.12. Table 2.12 Elements and their functions
2.14.13. Table 2.13 Technical characteristics of the lubrication system
2.14.14. Table 2.14 Recommended Engine Oil
2.14.15. Table 2.15 of the Characteristic of the oil pump
2.14.16. Table 2.16 of the Characteristic of an oil filter
2.14.17. Table 2.17 Technical characteristics of the cooling system
2.14.18. Table 2.18 of the Characteristic of the fan of the cooling system, fan engine
2.14.19. Table 2.19 Technical characteristics of fuel system
2.14.20. Table 2.20 Technical characteristics of system of an admission
2.14.21. Table 2.21 Technical systems of electric equipment of engines
2.14.22. Table 2.22 Arrangement of Conclusions
2.14.23. Table 2.23 Adjusting laying of the balancing block, engines with the installed mechanism of change of phases of gas distribution
2.14.24. Table 2.24 Specifications of a mechanical part of engines of the L8, LF, L3 models
2.14.25. Table 2.25 Oil filling volume (approximate quantity), l
2.14.26. Table 2.26 Target frequency of rotation of the engine
2.14.27. Table 2.27 of the Condition of shutdown of the air conditioning system
2.14.28. Table 2.28 Control of the Electric Fan of L8, LF Engines (hot area) and L3 engine
2.14.29. Table 2.29 System of Monitoring
2.14.30. Table 2.30 the Diagnostic codes connected with emissions (a diagnostic code) (mode 03)
2.14.31. Table 2.31 Parcel of Periodic Results of Diagnostics of System of Monitoring (mode 06)
2.14.32. Table 2.32 Technical characteristics of the Z6 engine
2.14.33. Table 2.33 Recommended Engine Oil
2.14.34. Table 2.34 Concentration of Antifreeze
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 









1e5999b2

2-14-32-tablica-2-32-tekhnicheskie-kharakteristiki-dvigatelya-z6.html

2.14.32. Table 2.32 Technical characteristics of the Z6 engine

* 1 Generator generating the current size.
* 2 Sensor of pressure of coolant (average) are switched off.
* 3 Sensor of pressure of coolant (average) are switched on.
* 4 Current of leak - the established current (for an audioblka, hours, the PCM block, etc.) when the switch of ignition is in situation it is switched off, and the ignition key is taken from the lock.
* 5 For hot area.
* 6 Nizhny Novgorod a limit have to be more than 0th A.
* 7 Include the following electric consumers and be convinced that tension grows:
– headlights;
– heater fan electric motor;
– heater of back glass.
"previous page
2.14.31. Table 2.31 Parcel of Periodic Results of Diagnostics of System of Monitoring (mode 06)		 following page"
2.14.33. Table 2.33 Recommended Engine Oil