18.104.22.168. Removal, check and installation of the pump of cooling liquid
Disconnect a negative wire of the rechargeable battery.
Merge cooling liquid of the engine.
Weaken a bolt of a pulley of the pump of cooling liquid to take off a driving belt.
Remove a pulley of the pump of cooling liquid.
Remove the pump of cooling liquid.
Carry out a visual inspection and be convinced that on the case and blades of the water pump there is no considerable pollution or a rust.
Make sure that on bladed the shaft does not have a side play and that it rotates freely by hand.
You make installation as it should be, the return to removal.
Again fill in cooling liquid in the engine.
|Fig. 2.217. Removal of the pump of cooling liquid: 1 – pulley of the pump of cooling liquid; 2 – pump of cooling liquid; 3 – sealing ring; 4 bolts of fastening of the pump
Be convinced of lack of leak of cooling liquid.