|
2-6-4-5-ustanovka-cepi-privoda-mekhanizma-gazoraspredeleniya.html
2.6.4.5. Installation of a chain of the drive of the mechanism of gas distribution
|
|
Fig. 2.262. Places of putting sealant on a forward cover of the engine
|
Apply kremniyevoorganichesky sealant on a forward cover of the engine, as shown in the figure 2.262.
|
ATTENTION
Establish a forward cover of the engine through 10 minposl of putting kremniyevoorganichesky sealant.
|
Thickness of the roller of the applied sealant: 2–4 mm.
|
|
Fig. 2.263. Order of tightening of bolts of fastening of a forward cover of the engine
|
Tighten bolts of fastening of a forward cover of the engine in the order shown in the figure 2.263. Establish a bolt No. 1, using a new sealing washer.
Apply pure engine oil on a forward epiploon.
Insert a forward epiploon into a forward cover of the engine hands.
Press a forward epiploon, using special adaptation and the hammer (fig. 2.264). Press fitting depth: from a forward cover of the engine – 0–0.5 mm.
|
|
Fig. 2.265. Scheme of a press fitting of a new forward epiploon
|
| 