Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.2.1. General information
3.2.2. Check and replacement of oil in the mechanical transmission
3.2.3. Removal and installation of the sensor of a speedometer of the car (without anti-blocking system of brakes)
3.2.4. Replacement of an epiploon (differential)
3.2.5. Removal and installation of the mechanism of gear shifting
3.2.6. Coupling case, dismantling of elements of a case of the main transfer
3.2.7. Check and assembly of components of differential and case of the main transfer
3.2.7.1. Installation of bearings of a gear gear wheel
3.2.7.2. Assembly of a cylindrical pin
3.2.7.3. Adjustment of a preliminary tightness in the bearing
3.2.7.4. Installation of differential in a coupling case
3.2.7.5. Installation of a case of the main transfer
3.2.7.6. Elimination of gaps of primary, secondary shaft and shaft of differential of a case of the main transfer
3.2.7.7. Measurement of loading of primary, secondary shaft and shaft of differential of a case of the main transfer
3.3. Automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 









1e5999b2

3-2-7-1-ustanovka-podshipnikov-zubchatojj-shesterni.html

3.2.7.1. Installation of bearings of a gear gear wheel

Fig. 3.51. Installation of the new bearing (from a gear wreath)


Using special adaptation, install the new bearing (from a gear wreath) (fig. 3.51).
Establish the leader a speedometer drive gear wheel.

Fig. 3.52. Installation of the new bearing (from outside, opposite to a gear wreath)


Using special adaptation, install the new bearing (from outside, opposite to a gear wreath) (fig. 3.52).

"previous page
3.2.7. Check and assembly of components of differential and case of the main transfer
following page"
3.2.7.2. Assembly of a cylindrical pin