|
3-4-5-snyatie-i-ustanovka-stupicy-zadnego-kolesa.html
3.4.5. Removal and installation of a nave of a back wheel
|
|
Fig. 3.119. Knocking-out of a fillet of a lock-nut of a nave of a wheel
|
Beat out the bent part of a lock-nut outside a small chisel and the hammer (fig. 3.119). Block a nave, having pressed a brake.
Turn off a lock-nut.
|
ATTENTION
The rotor of the sensor of anti-blocking system of brakes is removed only in case of its replacement.
|
By means of a chisel remove a rotor of the ABS sensor (fig. 3.120).
|
|
Fig. 3.121. Correct installation of a rotor of the ABS sensor: 1 – wheel nave; 2 – ABS sensor rotor
|
To establish a rotor of the ABS sensor orient special adaptation so that marking In was turned (fig. 3.121) down.
Press a new rotor of the sensor with use of special adaptation and a press (fig. 3.122).
| 