Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.1.1. Safety pedal of a brake
6.1.2. Vacuum amplifier of brakes
6.1.3. Main brake cylinder
6.1.4. Pressure regulator
6.1.5. Sensor of level of brake fluid
6.1.6. Anti-blocking system of brakes (ABS)
6.1.7. Management of dynamic stability
6.1.8. Control lamp of DSC
6.1.9. DSC system switch, control lamp of shutdown of the DSC system
6.1.10. Integrated sensor of management of dynamic stability
6.1.11. DSC HU/CM block of system of dynamic stability
6.1.12. Management of emergency brake application
6.1.13. Local network of the controller (CAN)
6.1.14. Onboard diagnostics
6.2. Brake system
6.3. Tables
7. Onboard electric equipment
8. Body
 









1e5999b2

6-1-8-kontrolnaya-lampa-dsc.html

6.1.8. Control lamp of DSC

The control lamp of DSC is established in a combination of devices and notifies the driver on DSC activation (the car is in side sliding) or TCS activation (pro-slipping of a driving wheel) in case the DSC system is not disconnected by the DSC system switch.
When the DSC and CAN system are serviceable, the control lamp of the DSC system lights up on 2–4 spr turn of the ignition key – in position of ON and is disconnected when checking functioning of a lamp. When the system works with failures, the control lamp of DSC remains included.
Operating modes of a control lamp of DSC are given in table 6.3.
"previous page
6.1.7. Management of dynamic stability		 following page"
6.1.9. DSC system switch, control lamp of shutdown of the DSC system