Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
7.1. General information
7.2. System of power supply
7.2.1. Rechargeable battery
7.2.2. Generator
7.2.2.1. Check on the car
7.2.2.2. Check of current on generator conclusions
7.2.2.3. Removal and installation of the generator
7.2.2.4. Removal and installation of high-voltage wires
7.2.3. Starter
7.3. System of lighting
7.4. Screen wipers and windscreen washers
7.5. Immobilizer
7.6. Checks of electric equipment
7.7. Tables
8. Body
 









1e5999b2

7-2-2-3-snyatie-i-ustanovka-generatora.html

7.2.2.3. Removal and installation of the generator

ATTENTION
When the rechargeable battery is connected, between a body of the car and a conclusion In there can be a breakdown. It can lead to a trauma, the fire or damage of electronic components of the car. Always disconnect the battery before removal of the generator.

Uncover the rechargeable battery.
Disconnect a negative wire from the rechargeable battery.
Remove the lower cover together with a mudguard.
Take off a driving belt.
Fix a broad tank of the cooling system so that it did not prevent work.
Fix a tank of the hydraulic booster of steering so that it did not prevent work.

Fig. 7.9. Dismantling components of the rechargeable battery: 1 – B conclusion cable; 2 – generator socket; 3 – generator


Remove in the order shown in the figure 7.9.
Establish as it should be, the return to removal.

NOTE
Remove a bolt And with the generator as the place for its removal is not enough (see fig. 7.9).

"previous page
7.2.2.2. Check of current on generator conclusions
following page"
7.2.2.4. Removal and installation of high-voltage wires