Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
7.1. General information
7.2. System of power supply
7.3. System of lighting
7.3.1. The forward combined lamp
7.3.2. The back combined lamp and the internal combined lamp
7.3.3. Removal and installation of the forward combined headlight
7.3.4. Adjustment of light of headlights
7.3.5. Removal and installation of a lamp of a headlight
7.3.6. Removal and installation of a gas-discharge lamp of a headlight
7.3.7. Removal and installation of a lamp of a parking lamp
7.3.8. Removal and installation of the forward index of turn
7.3.9. Removal and installation of the side index of turn
7.3.10. Adjustment of light of a forward fog light
7.3.11. Removal and installation of the back combined lamp
7.3.12. Removal and installation of the internal combined lamp
7.3.13. Removal and installation of a lamp of illumination of registration plate
7.3.14. Removal and installation of an additional signal of braking on a back spoiler
7.3.15. Removal and installation of a forward lamp of illumination of salon
7.3.15.1. Check of a forward lamp of illumination of salon
7.3.16. Removal and installation of the trailer switch of a door
7.3.17. Removal and installation of the lighting lamp of an ashtray
7.3.18. Removal and installation of a lamp of illumination of the lock of ignition
7.3.19. Removal and installation of a lamp of illumination of a ware box
7.3.20. Removal and installation of operating lighting switch on the dashboard
7.4. Screen wipers and windscreen washers
7.5. Immobilizer
7.6. Checks of electric equipment
7.7. Tables
8. Body
 









1e5999b2

7-3-15-snyatie-i-ustanovka-perednego-fonarya-osveshheniya-salona.html

7.3.15. Removal and installation of a forward lamp of illumination of salon




Disconnect a negative wire from the rechargeable battery.

Fig. 7.42. Components of a forward lamp of illumination of salon: 1 – forward lamp; 2 – socket; 3 – boss of a lamp; 4 – lamp lamp


Remove in the order specified in the figure 7.42.
Insert the screw-driver which is wrapped up by a tape with flat shliyets into a gap between an upholstery and a lamp.

Fig. 7.43. Release of clips of fastening of a lamp


Press hooks to remove a lamp (fig. 7.43).

"previous page
7.3.14. Removal and installation of an additional signal of braking on a back spoiler
following page"
7.3.15.1. Check of a forward lamp of illumination of salon