Mazda 3 since 2003
	1. Operation and maintenance of the car
	2. Engine
		2.1. General description of new engines of the L8, LF and L3 models
		2.2. Mechanical part of engines
		2.3. Appendix 1
		2.4. Appendix 2
		2.5. Appendix 3
		2.6. The Z6 engine – a mechanical part
		2.7. Lubrication system
		2.8. Cooling system
		2.9. System of an admission
		2.10. Fuel system
			2.10.1. Removal and installation of the block of the fuel pump
				2.10.1.1. Removal
				2.10.1.2. Installation
				2.10.1.3. Check of leak of fuel after installation of the block of the pump
			2.10.2. Removal and installation of a fuel nozzle
		2.11. System of production of the fulfilled gases and system of decrease in toxicity
		2.12. System of ignition
		2.13. Control system
		2.14. Tables
	3. Transmission
	4. Running gear
	5. Steering mechanism
	6. Brake system
	7. Onboard electric equipment
	8. Body

2-10-1-1-snyatie.html

2.10.1.1. Removal

Disconnect a negative wire from the rechargeable battery.

Remove the fuel tank.

Remove a quick-detachable connector.

ATTENTION

The cover of the fuel pump can be damaged if special adaptation is installed on a cover leaky.

Reliably fix special adaptation so that between uvulas of special adaptation and a side surface of a cover there was no gap.

Fig. 2.322. Removal of a cover of the fuel pump

Uncover the fuel pump, using special adaptation (fig. 2.322).

Remove the block of the fuel pump.