Mazda 3 since 2003
	1. Operation and maintenance of the car
	2. Engine
		2.1. General description of new engines of the L8, LF and L3 models
		2.2. Mechanical part of engines
		2.3. Appendix 1
		2.4. Appendix 2
		2.5. Appendix 3
		2.6. The Z6 engine – a mechanical part
		2.7. Lubrication system
		2.8. Cooling system
		2.9. System of an admission
		2.10. Fuel system
			2.10.1. Removal and installation of the block of the fuel pump
				2.10.1.1. Removal
				2.10.1.2. Installation
				2.10.1.3. Check of leak of fuel after installation of the block of the pump
			2.10.2. Removal and installation of a fuel nozzle
		2.11. System of production of the fulfilled gases and system of decrease in toxicity
		2.12. System of ignition
		2.13. Control system
		2.14. Tables
	3. Transmission
	4. Running gear
	5. Steering mechanism
	6. Brake system
	7. Onboard electric equipment
	8. Body

2-10-1-3-proverka-utechki-topliva-posle-ustanovki-bloka-nasosa.html

2.10.1.3. Check of leak of fuel after installation of the block of the pump

Before installation of the fuel tank, check lack of leak of fuel during creation in the fuel tank of pressure of +5.9 kPa.

Install the fuel tank.

Set the car in motion and at a small speed sharply slow down five – six times.

Stop the car and be convinced of lack of traces of leak of fuel around the block of the fuel pump outside of the car.