Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
2.1. General description of new engines of the L8, LF and L3 models
2.2. Mechanical part of engines
2.3. Appendix 1
2.4. Appendix 2
2.5. Appendix 3
2.6. The Z6 engine – a mechanical part
2.7. Lubrication system
2.7.1. Check of pressure of oil
2.7.2. Replacement of engine oil
2.7.3. Installation of an oil filter
2.7.4. Removal and installation of the oil pallet
2.7.5. Removal and installation of the oil pump Removal Installation
2.7.6. Dismantling, check and assembly of the oil pump
2.8. Cooling system
2.9. System of an admission
2.10. Fuel system
2.11. System of production of the fulfilled gases and system of decrease in toxicity
2.12. System of ignition
2.13. Control system
2.14. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body


2-7-5-2-ustanovka.html Installation

Fig. 2.296. Installation of the oil pump

Install laying of the oil pump on the oil pump (fig. 2.296).
Install the oil pump with laying on the engine.
Add liquid in the engine cooling system.
Start the engine and check lack of leak of oil.
If oil leak takes place, define a faulty element and repair or replace it.
Check oil pressure.
Check oil level.
Check installation of a corner of an advancing of ignition and frequency of rotation of the engine idling.

"previous page Removal
following page"
2.7.6. Dismantling, check and assembly of the oil pump