Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.2.1. General information
3.2.2. Check and replacement of oil in the mechanical transmission
3.2.2.1. Oil check
3.2.2.2. Oil replacement
3.2.3. Removal and installation of the sensor of a speedometer of the car (without anti-blocking system of brakes)
3.2.4. Replacement of an epiploon (differential)
3.2.5. Removal and installation of the mechanism of gear shifting
3.2.6. Coupling case, dismantling of elements of a case of the main transfer
3.2.7. Check and assembly of components of differential and case of the main transfer
3.3. Automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 









1e5999b2

3-2-2-1-proverka-masla.html

3.2.2.1. Oil check

Set the vehicle on a horizontal surface.
Remove an opening stopper for control of level of oil and a washer.
Level of oil has to be about edge of an opening.
If the level of oil is lower than edge of an opening, add oil of the same type through an opening for control of level of oil.
Oil class: API Service GL-4 or GL-5.
Viscosity of oil:
all-weather: SAE 75W-90;
it is above 10 °C: SAE 80W-90.
Establish a new washer and a stopper of an opening for control of level of oil.
Inhaling moment: 40–58 N · m.

"previous page
3.2.2. Check and replacement of oil in the mechanical transmission
following page"
3.2.2.2. Oil replacement