Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
7.1. General information
7.2. System of power supply
7.3. System of lighting
7.3.1. The forward combined lamp
7.3.2. The back combined lamp and the internal combined lamp
7.3.3. Removal and installation of the forward combined headlight
7.3.4. Adjustment of light of headlights
7.3.5. Removal and installation of a lamp of a headlight
7.3.6. Removal and installation of a gas-discharge lamp of a headlight
7.3.7. Removal and installation of a lamp of a parking lamp
7.3.8. Removal and installation of the forward index of turn
7.3.9. Removal and installation of the side index of turn
7.3.10. Adjustment of light of a forward fog light
7.3.11. Removal and installation of the back combined lamp
7.3.12. Removal and installation of the internal combined lamp
7.3.13. Removal and installation of a lamp of illumination of registration plate
7.3.14. Removal and installation of an additional signal of braking on a back spoiler
7.3.15. Removal and installation of a forward lamp of illumination of salon
7.3.16. Removal and installation of the trailer switch of a door
7.3.17. Removal and installation of the lighting lamp of an ashtray
7.3.18. Removal and installation of a lamp of illumination of the lock of ignition
7.3.19. Removal and installation of a lamp of illumination of a ware box
7.3.20. Removal and installation of operating lighting switch on the dashboard
7.4. Screen wipers and windscreen washers
7.5. Immobilizer
7.6. Checks of electric equipment
7.7. Tables
8. Body
 









1e5999b2

7-3-13-snyatie-i-ustanovka-fonarya-osveshheniya-nomernogo-znaka.html

7.3.13. Removal and installation of a lamp of illumination of registration plate

Disconnect a negative wire from the rechargeable battery.

Fig. 7.38. Removal of a lamp of illumination of registration plate


Remove the lens, then remove a lamp of a lamp of illumination of registration plate (fig. 7.38).
Remove a lamp of illumination of registration plate from a rear bumper.
Remove an upholstery of a back part of a luggage carrier.
Remove fastenings and unbend a side overlay of a luggage carrier a little back. (right)
Remove fastenings and unbend a side overlay of a luggage carrier a little back. (left) (<sedan>)
Uncover a technological opening. (left) (<hatch-back>)
Remove the back combined lamp.

Fig. 7.39. Detachment of the socket of a lamp of illumination of registration plate


Disconnect the socket of a lamp of illumination of registration plate (fig. 7.39).
Remove a rear bumper.
Separate clips from a rear bumper.
Remove a plait of a lamp of illumination of registration plate and a tape.
Establish as it should be, the return to removal.

"previous page
7.3.12. Removal and installation of the internal combined lamp
following page"
7.3.14. Removal and installation of an additional signal of braking on a back spoiler