8.2.14. Removal and installation of the block of a back door
Remove glass of a back door.
Remove the internal handle.
Remove the loudspeaker of a back door.
Disconnect the window regulator electric motor socket with the servo-driver and the automatic socket of the executive mechanism of the lock of a door.
Remove a plait of a back door from the block of a back door.
Turn off bolts.
Remove a hook of the executive mechanism of the lock of a door from its block.
|Fig. 8.30. Removal of the block of a forward door
Pull the block of a back door a little to yourself, without allowing the window regulator regulator to be latched with the servo-driver on it, take out the block from a door (fig. 8.30)
Take out an internal cable of the handle and a cable of the button of the lock of a door from an opening.
|Fig. 8.31. Removal of the handle of the regulator and stklopodjemnik
If your car is equipped with system of window regulators with the servo-driver, remove the electric motor and the regulator of a window regulator with the servo-driver from the door block. If the car is not equipped with system of window regulators with the servo-driver, remove the handle of the regulator and a window regulator (fig. 8.31)
Establish as it should be, the return to removal.