2.13.2. Removal and installation of the sensor of provision of a bent shaft
When replacing the sensor of position of the crankshaft, make sure that on it there are no foreign objects, type of metal sawdust.
In the presence of sawdust or shaving the output signal of the sensor will be distorted owing to fluctuations of a magnetic flux that will lead to deterioration in work of a control system of the engine.
Uncover the rechargeable battery.
Disconnect a negative wire from the rechargeable battery.
Perform the following procedure for ensuring convenience of access.
Remove the lower cover.
|Fig. 2.342. Removal of the sensor of position of the crankshaft
Remove the sensor of position of the crankshaft (fig. 2.342)
Establish as it should be, the return to removal.
Moment of an inhaling of the sensor of position of the crankshaft: 7,8–10,8 N · m.