Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
2.1. General description of new engines of the L8, LF and L3 models
2.2. Mechanical part of engines
2.3. Appendix 1
2.4. Appendix 2
2.5. Appendix 3
2.6. The Z6 engine – a mechanical part
2.7. Lubrication system
2.8. Cooling system
2.8.1. Measurement of temperature of cooling liquid
2.8.2. Replacement of cooling liquid of the engine
2.8.3. Removal and installation of the pump of cooling liquid
2.8.3.1. Removal
2.8.3.2. Installation
2.9. System of an admission
2.10. Fuel system
2.11. System of production of the fulfilled gases and system of decrease in toxicity
2.12. System of ignition
2.13. Control system
2.14. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 









1e5999b2

2-8-3-1-snyatie.html

2.8.3.1. Removal

1. Uncover the rechargeable battery.
2. Disconnect a negative wire from the rechargeable battery.
3. Remove the lower cover together with a mudguard.
4. Merge cooling liquid from the engine.
5. Fix a broad tank of the cooling system so that it did not prevent work.
6. Take off a driving belt.
7. Fix a tank of the hydraulic booster of steering so that it did not prevent work.
8. Remove the generator.

Fig. 2.307. Removal of the pump of cooling liquid: 1 – knot of the pump of cooling liquid; 2 – sealing ring


9. Remove knot of the pump of cooling liquid and a sealing ring (fig. 2.307).

"previous page
2.8.3. Removal and installation of the pump of cooling liquid
following page"
2.8.3.2. Installation