|
3-1-2-6-snyatie-i-ustanovka-glavnogo-cilindra-privoda-vyklyucheniya-scepleniya.html
3.1.2.6. Removal and installation of the main cylinder of the drive of switching off of couplingMerge liquid from a coupling hydraulic actuator.
Remove the main brake cylinder, having turned off fastening bolts.
Remove the vacuum amplifier of brakes, having turned off fastening bolts.
Having weakened a clip, disconnect a tube of a tank of the main cylinder of coupling from the main cylinder of coupling.
Merge liquid in a plastic container.
Disconnect a flexible hose from the main cylinder of coupling.
Using special adaptation, connect a flexible hose and tighten a fastening nut.
Connect a tube of a tank of the main cylinder of coupling with a clip to the main cylinder of coupling.
|
|
Fig. 3.10. Components of the main cylinder of the drive of switching off of coupling: 1 – collar; 2 – coupling switching off hydraulic actuator tube; 3 – nut; 4 – main cylinder of the drive of switching off of coupling; 5 – laying
|
|
ATTENTION
Connect a tube of a tank of the main cylinder of coupling so that it was not bent.
|
Establish the vacuum amplifier of brakes.
Install the main brake cylinder.
Remove air from the main cylinder.
Remove air from the brake system.
Having filled a tank of the main brake cylinder with liquid for coupling, remove air from system of coupling.
Check and adjust brake pedal height.
Check and adjust a coupling pedal assembled.
Check leak of brake fluid.
Check leak of liquid for coupling.
Check liquid level in a coupling hydraulic actuator tank.
| 