Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.3.1. General information
3.3.2. Design and operation of the mechanism of transmission
3.3.3. System of electronic control (RSM)
3.3.4. Mechanism of switching of the automatic transmission
3.3.4.1. Principle of operation of the mechanism of switching of the automatic transmission
3.3.4.2. Switching blocking check
3.3.4.3. Check of blocking of the ignition key
3.3.4.4. Check of a cable of blocking
3.3.4.5. Check of the lever of the selector
3.3.4.6. Adjustment of a cable of the choice of transfer
3.3.4.7. Adjustment of the switch of range of the transmission
3.3.4.8. Removal and installation of the lever of the selector
3.3.4.9. Installation of a cable of blocking
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 









1e5999b2

3-3-4-6-regulirovka-trosa-vybora-peredachi.html

3.3.4.6. Adjustment of a cable of the choice of transfer

Remove the central console.
Move the selector lever to situation P.

Fig. 3.80. A transfer choice cable unblocking (from the selector lever)


Unblock a transfer choice cable clamp (from the selector lever) in the order shown in the figure 3.80.
Make sure that the shaft of manual switching is in situation P.

Fig. 3.81. Blocking of a cable of the choice of transfer (from the selector lever)


Block a transfer choice cable clamp (from the selector lever) in the order shown in the figure 3.81.
Install the central console.
Move the selector lever from situation P to situation l and be convinced that in this area there are no elements disturbing the lever.

"previous page
3.3.4.5. Check of the lever of the selector
following page"
3.3.4.7. Adjustment of the switch of range of the transmission