Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
5.1. General information
5.2. General checks
5.3. Working operations with the steering mechanism
5.3.1. Precautionary measures during the work with system of passive safety (SRS)
5.3.2. Removal, check and installation of a steering wheel and steering column
5.3.3. Dismantling of the steering mechanism and steering drafts
5.3.4. Check of the steering mechanism and steering drafts
5.3.5. Removal and installation of the pump of the hydraulic booster
5.4. Tables
6. Brake system
7. Onboard electric equipment
8. Body
 









1e5999b2

5-3-1-mery-predostorozhnosti-pri-rabote-s-sistemojj-passivnojj-bezopasnosti-srs.html

5.3.1. Precautionary measures during the work with system of passive safety (SRS)

ATTENTION
Maloperation with the module of a safety cushion can lead to sudden operation of a pillow and traumatizing working. Surely study safety rules when performing these works.

The Mazda 3 car is equipped with system of passive safety which includes an inflatable safety cushion of the driver, an inflatable safety cushion of the forward passenger, a side inflatable safety cushion and a side inflatable blind of safety. At violation of the sequence of performance of operations the system of passive safety can unexpectedly work that will lead to accident. If at service of system of passive safety the mistake was made, the system can will not execute the functions at collision. Before service performance (including removal or installation of elements, their check or replacement), attentively read the following items, and then execute the operations described in the repair manual.
It is possible to get to work through 90 with after the ignition key is turned in the provision of "LOCK", and the wire is disconnected from a negative conclusion of the rechargeable battery. (The system of passive safety is equipped with the spare power supply therefore if to get to work earlier, than through 90 with from the moment of disconnection of a wire from a negative conclusion of the rechargeable battery, the system of passive safety can work.).
Do not subject modules of safety cushions in the button of a sound signal, the dashboard, and also sensors of safety cushions to direct effect of hot air or a flame.

ATTENTION
It is difficult to confirm signs of malfunction of system of passive safety therefore diagnostic codes are the most important source of information by search of malfunctions.

Even in cases of insignificant collisions when the system of passive safety does not work, check modules and sensors of inflatable safety cushions.
Before carrying out repair remove the sensor of an inflatable safety cushion, in order to avoid its damage.
Never use details of system of passive safety from other car. Replace details new. Do not sort and do not repair modules and sensors of inflatable safety cushions for their reuse. If modules and sensors of inflatable safety cushions fell, have cracks, dents or other defects on cases, arms or sockets, replace them new.
By search of malfunctions in electric chains of system use volt/ohmmeter with a high impedance (not less than 10 kOhm / In).
Elements of system of passive safety are supplied with information labels. Follow instructions on these labels.
Upon termination of works with system of passive safety check a lamp of its alarm system. At a wire detachment from a negative conclusion of the rechargeable battery memory of hours and the audio system is cut off power. Before works write down contents of memory of the audio system. After performance of all operations restore settings of the audio system and determine time on hours. For prevention of deleting of memory in the memorable systems never use an external source of reserve food.

"previous page
5.3. Working operations with the steering mechanism
following page"
5.3.2. Removal, check and installation of a steering wheel and steering column