Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
5.1. General information
5.2. General checks
5.3. Working operations with the steering mechanism
5.3.1. Precautionary measures during the work with system of passive safety (SRS)
5.3.2. Removal, check and installation of a steering wheel and steering column
5.3.3. Dismantling of the steering mechanism and steering drafts
5.3.3.1. Dismantling of steering draft
5.3.3.2. Dismantling of a shaft of a gear wheel and case
5.3.3.3. Dismantling of the top bearing and epiploon
5.3.3.4. Dismantling of an epiploon of an internal guide
5.3.4. Check of the steering mechanism and steering drafts
5.3.5. Removal and installation of the pump of the hydraulic booster
5.4. Tables
6. Brake system
7. Onboard electric equipment
8. Body
 









1e5999b2

5-3-3-razborka-rulevogo-mekhanizma-i-rulevykh-tyag.html

5.3.3. Dismantling of the steering mechanism and steering drafts





ATTENTION
When fastening an arm of the steering mechanism in a vice establish copper plates on sponges of a vice, enclose rags or similar material.


Fig. 5.16. Components of the steering mechanism and steering drafts: 1 – hydraulic system pipeline; 2 – tip of steering draft; 3 – lock-nut; 4 – collar of a protective cover; 5 – tape collar of a protective cover; 6 – protective cover; 7 – steering draft; 8 – washer; 9 – lock-nut (adjusting cover); 10 – adjusting cover; 11 – lath emphasis spring; 12 – lath emphasis; 13 – bolt; 14 – shaft of a gear wheel and case; 15 – gear wheel shaft; 16 – sealing ring; 17 – lock ring; 18 – the operating valve; 19 – ring sealant; 20 – gear wheel shaft; 21 – valve case; 22 – top bearing; 23 – epiploon; 24 – return pipeline; 25 – valve case; 26 – holder; 27 – sealing ring; 28 – U-shaped laying; 29 – basic ring; 30 – steering rack; 31 – ring sealant; 32 – sealing ring; 33 – epiploon; 34 – internal guide; 35 – case of the steering mechanism; 36 – rubber support


Components of the steering mechanism and steering drafts are shown in fig. 5.16.

"previous page
5.3.2.3. Installation
following page"
5.3.3.1. Dismantling of steering draft