Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
8.1. General information
8.2. Hinged components of a body
8.2.1. Removal and installation of a cowl
8.2.2. Adjustment of provision of a cowl
8.2.3. Removal and installation of the panel of a forward wing
8.2.4. Removal and installation of a front bumper
8.2.5. Removal and installation of a rear bumper
8.2.6. Doors
8.2.7. Removal and installation of a forward door
8.2.8. Removal and installation of a back door
8.2.9. Adjustment of a door
8.2.10. Adjustment of a door of a back
8.2.11. Removal and installation of glass of a forward door
8.2.12. Removal and installation of glass of a back door
8.2.13. Removal and installation of the block of a forward door
8.2.14. Removal and installation of the block of a back door
8.2.15. Window regulators
8.2.15.1. Main characteristics
8.2.15.2. The window regulator electric motor with the servo-driver
8.2.15.3. System of the servo-driver of locks of doors
8.2.15.4. Removal and installation of the regulator of a window regulator with the servo-driver
8.2.15.5. Removal and installation of the electric motor of a window regulator with the servo-driver
8.3. Body glazing
8.4. Seats
8.5. Conditioner and heater
8.6. Tables
 









1e5999b2

8-2-15-4-snyatie-i-ustanovka-regulyatora-steklopodemnika-s-servoprivodom.html

8.2.15.4. Removal and installation of the regulator of a window regulator with the servo-driver

Disconnect a negative wire of the rechargeable battery.
Remove glass of a forward door / a back door.
Remove the loudspeaker of a forward door / a back door.
Remove the window regulator electric motor with the servo-driver.

Fig. 8.34. Nut of fastening of a drum of the regulator


Turn off nuts (fig. 8.34).

Fig. 8.35. Office of the case of a drum of the regulator


Implant a hand through a loudspeaker opening, turn the case of a drum of the regulator in the direction shown in the figure 8.35, and separate the case of a drum of the regulator from hooks of fastening of the block of a door.

Fig. 8.36. Removal of a regelyator of a window regulator


Take out the window regulator regulator with the servo-driver from an opening of installation of the loudspeaker (fig. 8.36).
Establish as it should be, the return to removal.

"previous page
8.2.15.3. System of the servo-driver of locks of doors
following page"
8.2.15.5. Removal and installation of the electric motor of a window regulator with the servo-driver