1.4.1.5. Installation of a spare wheel

1. Clear rags of dirt privalochny surfaces on a disk of a wheel and a nave, and also hairpins.

2. Establish a spare wheel.

3. Screw wheel nuts on hairpins (the conic party of nuts has to be turned to a wheel). Tighten nuts by hand.

Fig. 1.167. An order of delay in fastening of nuts at installation of a spare wheel

4. Rotating the cranked handle of a jack counterclockwise, lower the car. By means of a wheel key tighten nuts in specified in the drawing 1.167 sequences.

The moment of an inhaling of wheel nuts – 88–117 (9–11) Nanometers (kgf-m)

5. Lay a faulty wheel in a niche of the luggage compartment and fix a wheel by means of a clamping washer and a bolt.

6. Check air pressure in the tire.

7. As soon as possible repair the damaged wheel or replace it with new.