Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
2.1. General description of new engines of the L8, LF and L3 models
2.1.1. Mechanical part of engines
2.1.1.1. Cover of a head of the block of cylinders
2.1.1.2. Head of the block of cylinders
2.1.1.3. Laying of a head of the block of cylinders
2.1.1.4. Block of cylinders
2.1.1.5. Bent shaft and radical bearing
2.1.1.6. Balancing block
2.1.1.7. Principle of operation of the balancing block
2.1.1.8. Damper of tortional fluctuations of a bent shaft
2.1.1.9. Forward cover of the engine
2.1.1.10. Piston
2.1.1.11. Piston rings and piston finger
2.1.1.12. Rod and conrod bearing
2.1.1.13. The valvate mechanism – general information
2.1.1.14. Camshaft
2.1.1.15. Camshaft asterisk
2.1.1.16. Asterisk of a bent shaft
2.1.1.17. Gas distribution mechanism drive chain
2.1.1.18. Natyazhitel of a gas distribution mechanism drive chain
2.1.1.19. The valve, a valvate spring, a maslootrazhatelny cap, the directing valve plug
2.1.1.20. Valve pusher
2.1.2. Mechanism of change of phases of gas distribution
2.1.3. Lubrication system
2.1.4. Cooling system
2.1.5. Fuel system
2.1.6. System of production of the fulfilled gases and system of decrease in toxicity
2.1.7. Electric equipment of engines
2.2. Mechanical part of engines
2.3. Appendix 1
2.4. Appendix 2
2.5. Appendix 3
2.6. The Z6 engine – a mechanical part
2.7. Lubrication system
2.8. Cooling system
2.9. System of an admission
2.10. Fuel system
2.11. System of production of the fulfilled gases and system of decrease in toxicity
2.12. System of ignition
2.13. Control system
2.14. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 









1e5999b2

2-1-1-15-zvezdochka-raspredelitelnogo-vala.html

2.1.1.15. Camshaft asterisk
Fig. 2.23. Camshaft asterisk: 1 – camshaft asterisk; 2 – executive mechanism of change of phases of gas distribution

In a design the camshaft asterisk from the alloyed alloy of high rigidity tempered for increase in resistance to attrition in a point of contact with a gas distribution mechanism drive chain is used. On engines of the L3 models the asterisk of the camshaft of inlet valves is combined with the executive mechanism of system of change of phases of gas distribution (fig. 2.23).
"previous page
2.1.1.14. Camshaft		 following page"
2.1.1.16. Asterisk of a bent shaft