Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
2.1. General description of new engines of the L8, LF and L3 models
2.1.1. Mechanical part of engines
2.1.1.1. Cover of a head of the block of cylinders
2.1.1.2. Head of the block of cylinders
2.1.1.3. Laying of a head of the block of cylinders
2.1.1.4. Block of cylinders
2.1.1.5. Bent shaft and radical bearing
2.1.1.6. Balancing block
2.1.1.7. Principle of operation of the balancing block
2.1.1.8. Damper of tortional fluctuations of a bent shaft
2.1.1.9. Forward cover of the engine
2.1.1.10. Piston
2.1.1.11. Piston rings and piston finger
2.1.1.12. Rod and conrod bearing
2.1.1.13. The valvate mechanism – general information
2.1.1.14. Camshaft
2.1.1.15. Camshaft asterisk
2.1.1.16. Asterisk of a bent shaft
2.1.1.17. Gas distribution mechanism drive chain
2.1.1.18. Natyazhitel of a gas distribution mechanism drive chain
2.1.1.19. The valve, a valvate spring, a maslootrazhatelny cap, the directing valve plug
2.1.1.20. Valve pusher
2.1.2. Mechanism of change of phases of gas distribution
2.1.3. Lubrication system
2.1.4. Cooling system
2.1.5. Fuel system
2.1.6. System of production of the fulfilled gases and system of decrease in toxicity
2.1.7. Electric equipment of engines
2.2. Mechanical part of engines
2.3. Appendix 1
2.4. Appendix 2
2.5. Appendix 3
2.6. The Z6 engine – a mechanical part
2.7. Lubrication system
2.8. Cooling system
2.9. System of an admission
2.10. Fuel system
2.11. System of production of the fulfilled gases and system of decrease in toxicity
2.12. System of ignition
2.13. Control system
2.14. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 









1e5999b2

2-1-1-9-perednyaya-kryshka-dvigatelya.html

2.1.1.9. Forward cover of the engine

Fig. 2.15. Forward cover of the engine: 1 – vertical projection; 2 – a technological opening for fixing of the lever of a natyazhitel; 3 – a technological opening for an unblocking of a natyazhitel of a chain; 4 – arm of an engine mount No. 3; 5 – opening of an adjusting bolt of a pulley of a bent shaft; 6 – rear view; 7 – oil filter; 8 – the channel of the operating oil valve


The forward cover of the engine is made of aluminum alloy and is combined with an arm No. 3 of fastening of the engine that reduces the weight and noise level. An opening for an adjusting bolt of a pulley of a bent shaft, a technological opening for an unblocking of a ratchet of the regulator of a tension of a chain and a technological opening for fixing of the lever of a natyazhitel when weakening a chain of the drive of the mechanism of gas distribution, are on a forward cover of the engine. On L3 engine models the oil pipeline and the integrated oil filter are on a forward cover (fig. 2.15).

"previous page
2.1.1.8. Damper of tortional fluctuations of a bent shaft
following page"
2.1.1.10. Piston