|
6-2-17-snyatie-i-ustanovka-gidravlicheskogo-bloka-antiblokirovochnojj-sistemy-tormozov.html
6.2.17. Removal and installation of the hydraulic block of anti-blocking system of brakes
|
ATTENTION
Internal elements of the hydraulic block of anti-blocking system of brakes can be damaged when falling the block on a firm surface. You watch to dropping the hydraulic block of anti-blocking system of brakes. Replace the hydraulic block of anti-blocking system of brakes if it underwent blow.
|
|
|
Fig. 6.61. Hydroblock of anti-blocking system of brakes: 1 – socket; 2 – brake highway; 3 – knot of the hydraulic block of anti-blocking system of brakes, arm; 4 – arm; 5 – control unit of anti-blocking system of brakes; 6 – hydraulic block of anti-blocking system of brakes
|
Remove the rechargeable battery and the platform of the rechargeable battery.
Remove a hose (models with the mechanical transmission).
Lift a socket cover in the direction of an arrow, pressing at the same time a uvula of a cover (fig. 6.62). Pull the socket to a forward part of the car and remove it.
|
|
Fig. 6.63. Drawing adjusting tags on the brake highway and the hydraulic block of anti-blocking system of brakes
|
Put an adjusting tag on the brake highway and the hydraulic block of anti-blocking system of brakes (fig. 6.63). Wind the socket with a protective tape to prevent hit of brake fluid inside.
Remove the brake highway.
|
|
Fig. 6.64. Removal of knot of the hydraulic block of anti-blocking system of brakes
|
As shown in the figure 6.64, move an arm in the direction of an arrow and remove knot of the hydraulic block of anti-blocking system of brakes and an arm from a body.
| 