Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.2. Brake system
6.2.1. Check and adjustment of elements of the brake system
6.2.2. Check of level of brake fluid in a tank of a hydraulic actuator of the working brake system
6.2.3. Removal of air from the brake system
6.2.4. Check of the backpressure valve of a vacuum hose (amplifier of brakes)
6.2.5. Removal and installation of a vacuum hose (amplifier of brakes)
6.2.6. Removal and installation of a pedal of a brake
6.2.7. Removal and installation of the main brake cylinder
6.2.8. Check of the sensor of level of liquid
6.2.9. Removal and installation of the vacuum amplifier of brakes
6.2.10. Check of the vacuum amplifier of brakes
6.2.11. Dismantling and assembly of the main cylinder
6.2.11.1. Dismantling
6.2.11.2. Assembly
6.2.12. Removal and installation of a forward brake disk
6.2.13. Replacement of front brake shoes
6.2.14. Removal and installation of the back disk brake mechanism
6.2.15. Check of the parking brake system
6.2.16. Removal, check and installation of the back sensor of speed of a wheel of ABS
6.2.17. Removal and installation of the hydraulic block of anti-blocking system of brakes
6.3. Tables
7. Onboard electric equipment
8. Body
 









1e5999b2

6-2-11-razborka-i-sborka-glavnogo-cilindra.html

6.2.11. Dismantling and assembly of the main cylinder





ATTENTION
If the case of the main cylinder is damaged, replace the main cylinder assembled. When fastening the main cylinder in a vice, clamp only a ledge of the main cylinder.

Fig. 6.32. Components of the main brake cylinder: 1 – cover; 2 – screw; 3 – tank; 4 – plug; 5 – lock ring; 6 – piston rod guide; 7 – cup; 8 – limiter; 9 – primary piston; 10, 11 – a lock pin and a sealing ring; 12 – secondary piston; 13 – case of the main cylinder





"previous page
6.2.10.3. Check and adjustment of length of the speaker of a rod
following page"
6.2.11.1. Dismantling