|
6-2-5-snyatie-i-ustanovka-vakuumnogo-shlanga-usilitel-tormozov.html
6.2.5. Removal and installation of a vacuum hose (amplifier of brakes)
|
|
Fig. 6.11. Detachment of the socket of a vacuum hose
|
Disconnect the socket of a vacuum hose from the amplifier of brakes, pressing uvulas of the socket of a vacuum hose (fig. 6.11).
Remove a collar, using flat-nose pliers, and disconnect a vacuum hose from an inlet collector (Z6) (fig. 6.12).
|
|
Fig. 6.13. A detachment of a vacuum hose from an inlet collector
|
Insert the thin screw-driver with flat shliyets in the point designated by an arrow in the figure 6.13, displace a ring down and disconnect a vacuum hose from an inlet collector (LF). Remove a vacuum hose.
Establish as it should be, the return to removal.
Make sure that the vacuum hose is inserted so that connection of a vacuum hose concerns a ring of an inlet collector (LF).
Insert the socket of a vacuum hose in the amplifier of brakes.
Make sure that the vacuum hose is established reliably, having pulled for it, and again insert it in the amplifier of brakes.
|
|
Fig. 6.14. Installation of the coil of the amplifier of brakes
|
Make sure that the coil of the amplifier of brakes is in the socket of a vacuum hose (fig. 6.14).
| 