Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
8.1. General information
8.2. Hinged components of a body
8.3. Body glazing
8.4. Seats
8.5. Conditioner and heater
8.5.1. Coolant
8.5.2. Air filter
8.5.3. Block of the air conditioning system
8.5.4. Evaporator
8.5.5. Broad valve
8.5.6. Condenser
8.5.7. Check of a radiator of a heater
8.5.8. Removal and installation of a back air duct
8.5.9. Removal and installation of the compressor of the air conditioning system
8.5.10. Dismantling and assembly of the obgonny coupling
8.5.10.1. Removal of a bolt of the obgonny coupling
8.5.11. Adjustment of the obgonny coupling
8.5.12. Check of the obgonny coupling
8.5.13. Removal and installation of the condenser
8.5.14. Check of the condenser
8.5.15. Removal and installation of lines of coolant (LF)
8.6. Tables
 









1e5999b2

8-5-10-razborka-i-sborka-obgonnojj-mufty.html

8.5.10. Dismantling and assembly of the obgonny coupling





Fig. 8.69. Dismantling of the obgonny coupling: 1 – bolt; 2 – press disk; 3 – laying; 4 – lock ring; 5 – pulley of the compressor of the air conditioning system; 6 – screw; 7 – collar; 8 – screw; 9 – stator and device of thermal protection; 10 – case of the compressor of the air conditioning system


Sort in the order specified in the figure 8.69.

"previous page
8.5.9. Removal and installation of the compressor of the air conditioning system
following page"
8.5.10.1. Removal of a bolt of the obgonny coupling