Remove a rust and dirt from a contact surface of a brake disk and a nave of a wheel.
Combine the tags made before removal and establish a brake disk on a wheel nave.
Establish a brake shoe (outer side) on a support.
Clear an open part of the piston.
|Fig. 6.54. Installation of the piston of the brake cylinder
Slowly rotating the piston clockwise with use of special adaptation drown it completely inside (fig. 6.54)
|Fig. 6.55. Scheme of installation of a spring of a brake shoe
Combine a spring of a brake shoe (inside) with a piston groove, and insert it in the direction of an arrow (fig. 6.55)
Establish a brake shoe (inside) in a support.
Install other components as it should be, the return to removal.
After installation several times press a pedal of a brake and check the following:
– piston stroke of the lever of the parking brake;
– prikhvatyvany brakes.