6.2.6.2. Installation

Establish a new axis of the hinge, having combined openings in a fork of the amplifier of brakes and a pedal of a brake.

Fig. 6.20. Check of installation of an axis of the hinge

Make sure that the axis of the hinge concerns a fork of the amplifier of brakes completely (fig. 6.20).

Check a brake pedal.

At completely released brake pedal, insert the new switch of signals of braking into an opening on a brake pedal.

Fig. 6.21. Turning of the switch of signals of braking on 45 °

Fix the switch of signals of braking, having turned it counterclockwise on 45 ° (fig. 6.21).

NOTE Adjustment of a gap of a bolt of the limiter and limiter of a pedal after the switch of signals of braking is reliably blocked, is not required.